S-4 STUDIO
HELP AND CONTACT

Support

Help for the two apps for the Torso S-4, also written Torso S4: S-4 Studio Controller for iPad and S-4 Studio for Mac.

Contact

Write to hello@synthycraft.com. A person reads every message, and we answer as soon as we can, usually within two working days.

It helps to say which app and version you use (Settings › ABOUT), the model and system version of your iPad or Mac, and the OS version of your S-4.

S-4 Studio and S-4 Studio Controller are made by Yahor Kamarou, who works under the name Synthy Craft.

S-4 Studio Controller for iPad

What it needs

An iPad with iPadOS 17 or later, a Torso S-4 with OS 2.x, the S-4's own USB cable (USB-C to USB-A) and a USB-C to USB adapter or a hub with a USB-A port. The app runs in landscape.

First launch

The first time the app opens it shows CONNECT THE S-4, four things to set once. You can open it again in Settings › ABOUT › CONNECTION GUIDE.

The S-4 does not show up

  1. Plug the S-4's own USB cable (USB-C to USB-A) into a USB-C to USB adapter or into a hub with a USB-A port, and plug that into the iPad. A USB-C to USB-C cable does not work. Apple's USB-C to USB Adapter works, and so does any USB-C OTG adapter.
  2. On the S-4, in CONFIG › MIDI, turn on CC CONTROL and PROGRAM CHANGE.
  3. Leave USB mass storage mode on the S-4 (CONFIG › SYSTEM › USB MASS STORAGE). As a disk the S-4 has no MIDI.
  4. In the app, Settings › MIDI PORTS lists every port the iPad sees. If the S-4 is not there, check the adapter and the cable, then tap REFRESH on CONNECTION.
  5. Still nothing? Unplug the S-4's power, connect the S-4 to the iPad, then plug the power back in.

The first four steps are also in the app under Settings › CONNECTION › TROUBLE CONNECTING?

The S-4 is connected but does not react

The top bar shows LIVE, but the S-4 does not follow the faders? On the S-4, check that CC CONTROL is on in CONFIG › MIDI. Then compare the channels: Settings › MIDI CHANNELS in the app must show the same channel for each track as the S-4 has in CONFIG › MIDI. Scenes need PROGRAM CHANGE on. Settings › CONNECTION › TEST THE LINK moves the first knob of track 1, so you can see the link work.

Why a USB-C to USB-C cable does not work

The S-4's USB-C port can be the host for MIDI controllers or a device for a computer. On a USB-C to USB-C cable to an iPad it takes the host role, and the iPad no longer sees it. The USB-A port of the adapter settles it: the iPad is the host and the S-4 is the instrument it plays. The two devices decide this before any app starts, so no app can change it.

The screen does not follow the knobs on the S-4

The S-4 does not report its knobs or its devices back over MIDI. The screen shows what the app last sent. Choosing a device in a slot does not switch it on the S-4, so set it on the S-4 and pick the same device in the app.

There is no sound

The app makes no sound of its own. It sends MIDI, and the S-4 makes the sound through its own outputs. Without an S-4 the top bar shows OFFLINE and the desk is silent.

Using a MIDI controller

Plug the controller into a hub beside the S-4, or pair it over Bluetooth in Settings › MIDI PORTS › BLUETOOTH MIDI › PAIR. Then tap LISTEN, tap a control on screen and move a knob or press a pad. A controller plugged into the S-4's own MIDI IN cannot be heard by the app.

Tempo and sync

In Settings › CLOCK, WHO LEADS decides who keeps the tempo.

  • S-4 LEADS: the app follows the tempo and the play button of the S-4. For that, turn SYNC OUT on in the S-4's CONFIG › MIDI.
  • APP LEADS: the app sends its own tempo and its PLAY and STOP to the S-4. For that, turn SYNC IN and START STOP on and SYNC OUT off in CONFIG › MIDI.

Pro, the trial and restoring a purchase

The desk, the scenes, the transport, the mixer and LISTEN are free, with no time limit. KEYS and SEQ are Pro, one purchase with no subscription.

You can try KEYS and SEQ free for 3 days. Open KEYS or SEQ from the switch in the top bar and touch the screen: the Pro sheet opens. Tap START 3 FREE DAYS there, or tap START TRIAL in Settings › PRO. Nothing is charged. The trial can be started once per Apple Account.

When the trial ends, KEYS and SEQ lock again by themselves. Your keyboards and patterns stay saved and open again when you unlock Pro.

On another iPad with the same Apple Account, or after you reinstall the app, open Settings › PRO and tap RESTORE PURCHASE.

If you have a code, tap REDEEM A CODE in the same place.

Refunds for App Store purchases are handled by Apple at reportaproblem.apple.com.

A new iPad

Your scene names, keyboards, patterns and controller mappings come with the backup of your iPad. Mapping presets and SEQ patterns can also be exported to the Files app and imported on the new iPad.

S-4 Studio for Mac

What it needs

A Mac with macOS 14 Sonoma or later, a Torso S-4 with OS 2.x and a USB-C cable. A MIDI controller is optional.

Moving projects and samples to the S-4

EXPORT writes the project to a folder on your Mac. On the S-4, turn on CONFIG › SYSTEM › USB MASS STORAGE. The S-4 appears on the Mac as a disk, and its sound and MIDI pause. Copy the project into PROJECTS and its samples into SAMPLES on that disk. When the files are across, eject the S-4's disk before you unplug it or go back to playing. The S-4 sees new files only after a clean eject.

The license key

The key is in the receipt e-mail from Gumroad and in your Gumroad library. One key works on up to 3 Mac computers. Activate once, and after that the app runs offline.

Settings › LICENSE › DEACTIVATE removes the key from that Mac, but it does not free one of the 3. If you have used all 3, write to hello@synthycraft.com and we will reset the key.

Refunds

If S-4 Studio does not work with your S-4, write within 14 days of the purchase for a full refund.

The S-4 itself

Is the Torso S4 the same as the Torso S-4?

Yes. Torso Electronics now writes S4, and older pages and shops write S-4. It is the same instrument. The apps keep S-4 in their names.

Questions about the instrument

For questions about the instrument, its firmware or a repair, ask Torso Electronics. Their contacts are in the S-4 manual at docs.torsoelectronics.com/s4. We make these apps on our own and are not part of Torso Electronics.